Andersen Full Stainless Self-Tailing Winch - 50ST FS

RRP:€2,068.58
You save: €169.58 (8%)
Price: €1,899.00
€1,569.42 ex. VAT
Choose option
ANDERSEN RA2050010000
Preorder
7 days (approx.)
+ −

Uncompromised performance, reliability and stainless steel durability and surprisingly light

See the Andersen Winch Weight Comparison Chart and the Andersen Winch Selection Guide.

Andersen Full Stainless Power Rib drum and self-tailing arm

Beautifully polished full stainless steel design results in an incredibly long lasting winch that becomes a highlight of the boat. Desirable not only on classic yachts, but on any yacht where performance, elegance and durability are not negotiable. Andersen winches are manufactured by Ronstan Denmark ApS and sold under the Ronstan Andersen brand.

Exclusive self-tailing mechanism - These Andersen Full Stainless winches incorporate the exclusive self-tailing mechanism that automatically accommodates a wide range of different sheet and halyard sizes allowing each winch to serve numerous on-board purposes. From raising sails to trimming sheets, these winches provide the reliable power you need for smooth sailing.

Stainless steel Power Rib™ drum - The Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum which generates maximum horizontal grip but minimizes vertical friction allowing lines to slide up the drum for better efficiency and less wear on ropes, reducing the replacements costs of sheets and halyards. The design allows fewer turns on the winch and makes tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface.

Cut-away view inside an Andersen 52ST FS Full Stainless self-tailing winch, showing the gears, drum and self-tailing arm

 

Low maintenance design - all Power Rib© pawls and springs are captive, and the design of the winch allows you to strip it down for service and greasing. The aluminium bronze alloy base plate is approximately 2 1/2 times stronger than traditional bronze. The pawls, made from machined AISI 316 cold-pressed stainless steel, are designed to hold the load without backing off.

Servicing is only required every 2 years under normal use.

Andersen E1 electric conversion on a Full Stainless self-tailing winch

Easy upgrade to electric

All Andersen winches from size 28ST upwards are factory prepared for upgrade to electric or hydraulic power thanks to the Modular Power System. Official options for the sizes we sell are the Andersen E1 Electric conversion (12 V or 24 V, single speed) and the Andersen Compact Motor (variable speed, above or below deck). A complete Andersen Full Stainless E1 Electric Winch is also available for selected sizes. The 12ST FS and 18ST FS are single-speed manual winches and are not part of this electric upgrade path.

Numbered features of the Andersen Full Stainless self-tailing winch

 

Features

  • AISI 329 stainless steel shaft
  • 360º adjustable self-tailing (from size 40ST and up)
  • Low friction curved self-tailing arm
  • Separated upper and lower bearings for increased support and efficiency
  • Large-diameter roller bearings to absorb drum loads and increase efficiency
  • Easy servicing of gears - cold-pressed stainless-steel AISI 316L captive pawls
  • Upper aluminium bronze base plate ensures a light, stiff and rugged construction
  • Self-tailing system adjusts automatically to suit various rope sizes
  • Lightweight stainless-steel drum with Power Rib
  • Polished Power Rib generates horizontal friction but minimizes vertical friction
  • Lightweight stainless-steel drum combined with an internal construction of aluminium bronze, results in similar weight to aluminium winches but far more durable.

Fitting

The Andersen manuals supplied with each size set out the hole pattern, bolt size and the tools needed. In general:

  1. Remove the self-tailing arm and drum, and keep drill dust away from the winch.
  2. Mark and drill the bolt holes using the template or the winch base, then bed the base and fasten it through a backing plate or large washers.
  3. On the 12ST FS the self-tailing arm is fixed in one position, so set the arm direction before marking the holes. From size 40ST the self-tailing arm can be rotated through 360º.
  4. Use the bolt size given in the manual for that model (M6, M8 or M10 depending on size).

A winch handle is not included and is required for operation.

Maintenance

Andersen recommend cleaning, greasing and inspection of all moving parts every 2 years under normal use. Under extensive use, such as racing, charter or blue water sailing, maintenance is recommended every year. Use Andersen Winch Grease and the service kit that matches the winch size and manufacture date (the date is stamped on the deck base plate, under the drum). Apply only a thin film of grease to the pawls so they can still move freely.

FAQ

Which size should I choose? - Use the Andersen Winch Selection Guide and the weight comparison chart, together with the line sizes and power ratios in the table below.

What line sizes does the self-tailer take? - It depends on the model: 8–14 mm on 12ST FS to 50ST FS, 8–16 mm on 52ST FS, and 8–18 mm on 58ST FS and 62ST FS. Use only the recommended line sizes for the self-tailing unit.

Can I convert this winch to electric? - Yes, from size 28ST FS upwards. Official options are the Andersen E1 Electric kit (12 V or 24 V) and the Andersen Compact Motor (above or below deck). The 12ST FS and 18ST FS remain manual. Complete E1 Electric winches are also listed for selected sizes; E1 and Compact Motor conversion kits are listed by Andersen/Ronstan if you already have the manual winch.

Which service kit do I need? - Kits are model and date specific. Remove the drum and read the date on the base plate, then choose the matching Andersen Winch Service Kit. Current FS manuals point to kit 18 (RA710018) for 12ST, 18ST and 28ST FS, kit 19 (RA710019) for 46ST FS, and kit 12 (RA710012) for 58ST and 62ST FS. Confirm 34ST, 40ST, 50ST and 52ST against the manual for your winch.

Is a winch handle included? - No. The winch is supplied on its own. Andersen stainless steel handles are sold separately.

Dimensions and models

Andersen Full Stainless winch dimensions diagram with base B, drum D, height H and line entry L

All dimensions in mm. Letters B, D, H and L match the table columns. Drawings: Andersen/Ronstan.

Model Part number Speeds Line mm Weight kg Gear 1st Gear 2nd Power 1st Power 2nd Base B mm Drum D mm Height H mm Line entry L mm
12ST FS RA2012010000 1 8–14 2.6 1.3 : 1 — 9.5 : 1 — 115 70 128 44
18ST FS RA2018010000 1 8–14 3.2 2.6 : 1 — 18.8 : 1 — 120 70 135 50
28ST FS RA2028010000 2 8–14 3.9 1.3 : 1 4.0 : 1 9.5 : 1 28.6 : 1 125 70 149 65
34ST FS RA2034010000 2 8–14 4.1 1.3 : 1 4.7 : 1 9.5 : 1 33.8 : 1 125 70 149 65
40ST FS RA2040010000 2 8–14 4.9 1.3 : 1 6.0 : 1 8.9 : 1 40.0 : 1 152 75 174 71
46ST FS RA2046010000 2 8–14 7.8 2.8 : 1 8.4 : 1 15.7 : 1 47.1 : 1 180 89 204 90
50ST FS RA2050010000 2 8–14 7.8 2.8 : 1 8.8 : 1 15.7 : 1 49.3 : 1 180 89 204 90
52ST FS RA2052010000 2 8–16 10.3 3.2 : 1 10.5 : 1 16.2 : 1 52.5 : 1 200 100 222 106
58ST FS RA2058010000 2 8–18 16 3.7 : 1 13.1 : 1 16 : 1 57.1 : 1 230 115 251 111
62ST FS RA2062010000 2 8–18 16 3.7 : 1 14.4 : 1 16 : 1 62.6 : 1 230 115 251 111

Power ratios are calculated with a 254 mm winch handle. Figures: Andersen/Ronstan.

Specifications

Brand Andersen (Ronstan)
Series Full Stainless (FS) self-tailing winch
Drum Polished stainless steel Power Rib™
Self-tailing Automatic, wide line range; 360º adjustable arm from size 40ST
Speeds 12ST FS and 18ST FS: single speed. 28ST FS to 62ST FS: two speed
Construction Stainless-steel drum and shaft, aluminium-bronze base and internal parts
Manufacturer Ronstan Denmark ApS, Vejle, Denmark

Included

  • 1 × Andersen Full Stainless Self-Tailing Winch, in the size selected

The winch handle, grease and service kit are not included.

Optional Accessories

  Code Andersen Winch - Size Availability Price
Andersen 12ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2012010000
12ST FS
3 days
€639.00  (€528.10 ex. VAT)
Andersen 18ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2018010000
18ST FS
In stock
€819.00  (€676.86 ex. VAT)
Andersen 28ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2028010000
28ST FS
3 days
€1,089.00  (€900.00 ex. VAT)
Andersen 34ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2034010000
34ST FS
In stock
€1,139.00  (€941.32 ex. VAT)
Andersen 40ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2040010000
40ST FS
In stock
€1,319.00  (€1,090.08 ex. VAT)
Andersen 46ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2046010000
46ST FS
In stock
€1,779.00  (€1,470.25 ex. VAT)
Andersen 50ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2050010000
50ST FS
7 days
€1,899.00  (€1,569.42 ex. VAT)
Andersen 52ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2052010000
52ST FS
10 days
€2,499.00  (€2,065.29 ex. VAT)
Andersen 58ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2058010000
58ST FS
Please Confirm
€3,399.00  (€2,809.09 ex. VAT)
Andersen 62ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2062010000
62ST FS
Please Confirm
€3,449.00  (€2,850.41 ex. VAT)
ANDERSEN RA500001
€13.69   €11.31 ex. VAT
Multi-purpose silicon Teflon grease recommended for servicing Andersen winches. 1 x 75 g tube.
In stock
+ −

ANDERSEN RA507197
€79.94   €66.07 ex. VAT
Polished stainless steel winch handle from Andersen. A perfect match for your Andersen stainless steel winches. The profile pressed stainless steel design...
3 days

ANDERSEN RA710019
€29.79   €24.62 ex. VAT
Whether you are heading offshore or you are planning a long distance cruise, keeping a winch service kit on board will allow winch maintenance without...
In stock

MANUAL12ST-ST_FS_ver3.0-1.0A EN (999 Kb) - Download

MANUAL28ST-ST_FSver3.2-3.2F EN (981 Kb) - Download

MANUAL40ST-ST_FSver3.4-3.4F EN (989 Kb) - Download

MANUAL52ST-ST_FSver3.0-3.0F EN (1,025 Kb) - Download

MANUAL58-62ST-ST_FSver1.5-1.2 EN (992 Kb) - Download

MANUAL46-48ST-ST_FSver4.1-4.1F-1.0-1.0F (1,094 Kb) - Download

No posts found

Write a review

Uncompromised performance, reliability and stainless steel durability and surprisingly light

See the Andersen Winch Weight Comparison Chart and the Andersen Winch Selection Guide.

Andersen Full Stainless Power Rib drum and self-tailing arm

Beautifully polished full stainless steel design results in an incredibly long lasting winch that becomes a highlight of the boat. Desirable not only on classic yachts, but on any yacht where performance, elegance and durability are not negotiable. Andersen winches are manufactured by Ronstan Denmark ApS and sold under the Ronstan Andersen brand.

Exclusive self-tailing mechanism - These Andersen Full Stainless winches incorporate the exclusive self-tailing mechanism that automatically accommodates a wide range of different sheet and halyard sizes allowing each winch to serve numerous on-board purposes. From raising sails to trimming sheets, these winches provide the reliable power you need for smooth sailing.

Stainless steel Power Rib™ drum - The Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum which generates maximum horizontal grip but minimizes vertical friction allowing lines to slide up the drum for better efficiency and less wear on ropes, reducing the replacements costs of sheets and halyards. The design allows fewer turns on the winch and makes tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface.

Cut-away view inside an Andersen 52ST FS Full Stainless self-tailing winch, showing the gears, drum and self-tailing arm

 

Low maintenance design - all Power Rib© pawls and springs are captive, and the design of the winch allows you to strip it down for service and greasing. The aluminium bronze alloy base plate is approximately 2 1/2 times stronger than traditional bronze. The pawls, made from machined AISI 316 cold-pressed stainless steel, are designed to hold the load without backing off.

Servicing is only required every 2 years under normal use.

Andersen E1 electric conversion on a Full Stainless self-tailing winch

Easy upgrade to electric

All Andersen winches from size 28ST upwards are factory prepared for upgrade to electric or hydraulic power thanks to the Modular Power System. Official options for the sizes we sell are the Andersen E1 Electric conversion (12 V or 24 V, single speed) and the Andersen Compact Motor (variable speed, above or below deck). A complete Andersen Full Stainless E1 Electric Winch is also available for selected sizes. The 12ST FS and 18ST FS are single-speed manual winches and are not part of this electric upgrade path.

Numbered features of the Andersen Full Stainless self-tailing winch

 

Features

  • AISI 329 stainless steel shaft
  • 360º adjustable self-tailing (from size 40ST and up)
  • Low friction curved self-tailing arm
  • Separated upper and lower bearings for increased support and efficiency
  • Large-diameter roller bearings to absorb drum loads and increase efficiency
  • Easy servicing of gears - cold-pressed stainless-steel AISI 316L captive pawls
  • Upper aluminium bronze base plate ensures a light, stiff and rugged construction
  • Self-tailing system adjusts automatically to suit various rope sizes
  • Lightweight stainless-steel drum with Power Rib
  • Polished Power Rib generates horizontal friction but minimizes vertical friction
  • Lightweight stainless-steel drum combined with an internal construction of aluminium bronze, results in similar weight to aluminium winches but far more durable.

Fitting

The Andersen manuals supplied with each size set out the hole pattern, bolt size and the tools needed. In general:

  1. Remove the self-tailing arm and drum, and keep drill dust away from the winch.
  2. Mark and drill the bolt holes using the template or the winch base, then bed the base and fasten it through a backing plate or large washers.
  3. On the 12ST FS the self-tailing arm is fixed in one position, so set the arm direction before marking the holes. From size 40ST the self-tailing arm can be rotated through 360º.
  4. Use the bolt size given in the manual for that model (M6, M8 or M10 depending on size).

A winch handle is not included and is required for operation.

Maintenance

Andersen recommend cleaning, greasing and inspection of all moving parts every 2 years under normal use. Under extensive use, such as racing, charter or blue water sailing, maintenance is recommended every year. Use Andersen Winch Grease and the service kit that matches the winch size and manufacture date (the date is stamped on the deck base plate, under the drum). Apply only a thin film of grease to the pawls so they can still move freely.

FAQ

Which size should I choose? - Use the Andersen Winch Selection Guide and the weight comparison chart, together with the line sizes and power ratios in the table below.

What line sizes does the self-tailer take? - It depends on the model: 8–14 mm on 12ST FS to 50ST FS, 8–16 mm on 52ST FS, and 8–18 mm on 58ST FS and 62ST FS. Use only the recommended line sizes for the self-tailing unit.

Can I convert this winch to electric? - Yes, from size 28ST FS upwards. Official options are the Andersen E1 Electric kit (12 V or 24 V) and the Andersen Compact Motor (above or below deck). The 12ST FS and 18ST FS remain manual. Complete E1 Electric winches are also listed for selected sizes; E1 and Compact Motor conversion kits are listed by Andersen/Ronstan if you already have the manual winch.

Which service kit do I need? - Kits are model and date specific. Remove the drum and read the date on the base plate, then choose the matching Andersen Winch Service Kit. Current FS manuals point to kit 18 (RA710018) for 12ST, 18ST and 28ST FS, kit 19 (RA710019) for 46ST FS, and kit 12 (RA710012) for 58ST and 62ST FS. Confirm 34ST, 40ST, 50ST and 52ST against the manual for your winch.

Is a winch handle included? - No. The winch is supplied on its own. Andersen stainless steel handles are sold separately.

Dimensions and models

Andersen Full Stainless winch dimensions diagram with base B, drum D, height H and line entry L

All dimensions in mm. Letters B, D, H and L match the table columns. Drawings: Andersen/Ronstan.

Model Part number Speeds Line mm Weight kg Gear 1st Gear 2nd Power 1st Power 2nd Base B mm Drum D mm Height H mm Line entry L mm
12ST FS RA2012010000 1 8–14 2.6 1.3 : 1 — 9.5 : 1 — 115 70 128 44
18ST FS RA2018010000 1 8–14 3.2 2.6 : 1 — 18.8 : 1 — 120 70 135 50
28ST FS RA2028010000 2 8–14 3.9 1.3 : 1 4.0 : 1 9.5 : 1 28.6 : 1 125 70 149 65
34ST FS RA2034010000 2 8–14 4.1 1.3 : 1 4.7 : 1 9.5 : 1 33.8 : 1 125 70 149 65
40ST FS RA2040010000 2 8–14 4.9 1.3 : 1 6.0 : 1 8.9 : 1 40.0 : 1 152 75 174 71
46ST FS RA2046010000 2 8–14 7.8 2.8 : 1 8.4 : 1 15.7 : 1 47.1 : 1 180 89 204 90
50ST FS RA2050010000 2 8–14 7.8 2.8 : 1 8.8 : 1 15.7 : 1 49.3 : 1 180 89 204 90
52ST FS RA2052010000 2 8–16 10.3 3.2 : 1 10.5 : 1 16.2 : 1 52.5 : 1 200 100 222 106
58ST FS RA2058010000 2 8–18 16 3.7 : 1 13.1 : 1 16 : 1 57.1 : 1 230 115 251 111
62ST FS RA2062010000 2 8–18 16 3.7 : 1 14.4 : 1 16 : 1 62.6 : 1 230 115 251 111

Power ratios are calculated with a 254 mm winch handle. Figures: Andersen/Ronstan.

Specifications

Brand Andersen (Ronstan)
Series Full Stainless (FS) self-tailing winch
Drum Polished stainless steel Power Rib™
Self-tailing Automatic, wide line range; 360º adjustable arm from size 40ST
Speeds 12ST FS and 18ST FS: single speed. 28ST FS to 62ST FS: two speed
Construction Stainless-steel drum and shaft, aluminium-bronze base and internal parts
Manufacturer Ronstan Denmark ApS, Vejle, Denmark

Included

  • 1 × Andersen Full Stainless Self-Tailing Winch, in the size selected

The winch handle, grease and service kit are not included.

Optional Accessories

ANDERSEN RA500001
€13.69   €11.31 ex. VAT
Multi-purpose silicon Teflon grease recommended for servicing Andersen winches. 1 x 75 g tube.
In stock
+ −

ANDERSEN RA507197
€79.94   €66.07 ex. VAT
Polished stainless steel winch handle from Andersen. A perfect match for your Andersen stainless steel winches. The profile pressed stainless steel design...
3 days

ANDERSEN RA710019
€29.79   €24.62 ex. VAT
Whether you are heading offshore or you are planning a long distance cruise, keeping a winch service kit on board will allow winch maintenance without...
In stock
  Code Andersen Winch - Size Availability Price
Andersen 12ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2012010000
12ST FS
3 days
€639.00  (€528.10 ex. VAT)
Andersen 18ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2018010000
18ST FS
In stock
€819.00  (€676.86 ex. VAT)
Andersen 28ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2028010000
28ST FS
3 days
€1,089.00  (€900.00 ex. VAT)
Andersen 34ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2034010000
34ST FS
In stock
€1,139.00  (€941.32 ex. VAT)
Andersen 40ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2040010000
40ST FS
In stock
€1,319.00  (€1,090.08 ex. VAT)
Andersen 46ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2046010000
46ST FS
In stock
€1,779.00  (€1,470.25 ex. VAT)
Andersen 50ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2050010000
50ST FS
7 days
€1,899.00  (€1,569.42 ex. VAT)
Andersen 52ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2052010000
52ST FS
10 days
€2,499.00  (€2,065.29 ex. VAT)
Andersen 58ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2058010000
58ST FS
Please Confirm
€3,399.00  (€2,809.09 ex. VAT)
Andersen 62ST FS Full Stainless self-tailing winch in polished stainless steel
ANDERSEN RA2062010000
62ST FS
Please Confirm
€3,449.00  (€2,850.41 ex. VAT)

MANUAL12ST-ST_FS_ver3.0-1.0A EN (999 Kb) - Download

MANUAL28ST-ST_FSver3.2-3.2F EN (981 Kb) - Download

MANUAL40ST-ST_FSver3.4-3.4F EN (989 Kb) - Download

MANUAL52ST-ST_FSver3.0-3.0F EN (1,025 Kb) - Download

MANUAL58-62ST-ST_FSver1.5-1.2 EN (992 Kb) - Download

MANUAL46-48ST-ST_FSver4.1-4.1F-1.0-1.0F (1,094 Kb) - Download

No posts found

Write a review