Gleistein Rope Selection Guide

A Gleistein line should match the job it has to do on board, and the stretch you can accept. This guide follows Gleistein’s official method in the Gleistein Yacht Ropes Catalogue EN (Performance & Cruising, 2026): start with the use, then choose fibre and diameter. It covers the Gleistein lines we sell by the metre, with a minimum of 5 m.

The tables on this page are Gleistein’s recommendations. Every boat and sailor is different, and some skippers choose their own combinations. For example, DynaOne can also be used as a halyard on masts with furling sails, which are rarely adjusted; that is a skipper’s choice, not a Gleistein recommendation.

How to choose a line

The job on board. Halyards, sheets, control lines, furling lines, backstays, running backstays and mooring each have a preferred construction. The official application table below is taken from Gleistein’s “Application on board” charts (Performance, catalogue pp. 12–13, and Cruising, pp. 38–39), grouped for the web. A “Yes” means the official chart lists that rope for the main uses in the column; shorter notes show a narrower official range.

Fibre and stretch. Polyester is durable, UV-resistant and comfortable to handle. Cup is the lowest-stretch polyester option, at 1.4% elongation at 10% of the break load; Tasmania, Gemini X and GeoTwin are 2%; GeoTwist is 4%. Covered and uncovered Dyneema lines stretch less: MegaTwin SK78 0.4%, MegaTwin 07, TaperTwin and DynaOne 0.6%, and DynaOne HS Max 0.3%, all at 10% of the break load. Uncovered DynaOne and HS Max are intended for stays and similar static work; they are not ideal in clutches or stoppers (see the question below).

Colour and UV. Polyester lasts well in the sun. Dyneema fibre is also highly resistant to UV rays, according to Dyneema’s published fibre properties. In our experience, silver grey keeps its look best in high-UV areas such as the Mediterranean and the Caribbean. Solid dark colours fade and look older sooner; this is about appearance, not a change in the rope’s properties.

Diameter. Use the official sail-area table as a starting point, then choose from the diameters we stock on each product page. We do not give boat-length limits.

Official application table

The uses follow Gleistein’s official Application on board matrices. Halyards are main, gennaker, genoa and spinnaker; sheets are main, spi or gennaker, and genoa. Control lines include topping lift, boom vang, reefing, outhaul, cunningham, furling, spi guys and gennaker tack. Backstays, running backstays and checkstays: Gleistein’s official charts list the backstay and the running backstay for DynaOne and DynaOne HS Max. DynaOne HS Max is also listed officially for extremely light shrouds and stays. Some skippers also use these lines as checkstays; that is a skipper’s choice, not a Gleistein recommendation.

Rope Halyards Sheets Control lines Backstays Mooring
Tasmania Yes Yes Topping lift, vang, reef, furling, spi uphaul — Lighter lines and springs
Gemini X — Yes Spi guy and spi uphaul — —
Cup Yes — Topping lift, vang, reef, outhaul, cunningham, furling, spi foreguy and uphaul — —
MegaTwin 07 Yes Yes Yes — —
MegaTwin SK78 Yes Yes Yes — —
TaperTwin Genoa and spinnaker Yes Furling, gennaker tack, spi guy, foreguy and uphaul — —
DynaOne — — Vang, outhaul, cunningham, gennaker tack Yes —
DynaOne HS Max — — — Yes —
GeoTwin — — — — Yes
GeoTwist — — — — Yes

Official diameter by sail area

The figures come from the official “Rope diameter according to sail area” tables (Performance p. 15 and Cruising p. 41). They are a starting point, not a hard rule, and they are not organised by boat length. We do not stock every official size. Tasmania is stocked in 6–18 mm, Gemini X in 8–14 mm, Cup in 5–12 mm, MegaTwin 07 in 8–14 mm, MegaTwin SK78 in 6–12 mm and TaperTwin in 6, 8, 10 and 12 mm. Where a recommended range goes beyond what we stock, choose from the diameters on the product page.

Sail area (m²) Tasmania Gemini X Cup MegaTwin 07 MegaTwin SK78 TaperTwin
10 6–8 6–8 6–8 5–6 4–5 —
20 10–12 6–10 8–10 8–10 5–8 —
30 10–14 10–12 10–14 10–12 6–10 8
40 12–16 12–16 10–14 10–12 8–10 8–12
50 12–18 12–16 12–16 12–14 10–12 8–12
60 14–20 14–18 14–18 12–14 10–12 10–12
70 16–20 14–18 14–18 — 10–14 12–14
80 16–20 16–20 16–18 — 12–14 12–14
90 — 18–22 16–18 — 12–16 12–16
100 — 18–22 — — 12–16 12–16
125 — 20–24 — — 14–18 10–16
150 — — — — 16–20 14–16
175 — — — — 18–22 16

The ropes we sell

Stretch is official elongation at 10% of the break load. Diameters are the sizes we stock, not the full official range.

Rope Fibre and construction Stretch at 10% load Diameters we stock
Tasmania Polyester double braid, a versatile universal line 2% 6–18 mm
Gemini X Polyester double braid with a special finish for winches; mainsail and genoa sheets 2% 8–14 mm
Cup Polyester with a parallel-fibre core; lowest-stretch polyester option, especially for halyards 1.4% 5–12 mm
MegaTwin 07 Covered Dyneema, an all-round performance line 0.6% 8–14 mm
MegaTwin SK78 Covered Dyneema SK78, for halyards and sheets on performance boats 0.4% 6–12 mm
TaperTwin Covered, taperable Dyneema SK78, official for spinnaker halyards and sheets 0.6% 6, 8, 10 and 12 mm
DynaOne Uncovered Dyneema SK78 single braid, for stays and selected control lines 0.6% 3–14 mm
DynaOne HS Max Uncovered, creep-free Dyneema DM20, for shrouds and stays 0.3% 5–10 mm
GeoTwin Polyester double braid that stays flexible, for demanding mooring 2% 20–30 mm
GeoTwist Flexible 3-strand polyester mooring line, also used as an anchor warp 4% 10–20 mm

Also in the Gleistein range, but not in the application matrix: the Mega Cover System extra cover for uncovered Dyneema, the Geolink soft shackle, whipping twine, and our endless furling-line splice for Tasmania. Splicing tools are under D-Splicer.

Questions sailors often ask

Are the lines sold by the metre? Loose lines are, with a minimum of 5 m.

Can uncovered Dyneema go in a clutch? DynaOne and DynaOne HS Max are not ideal for use in clutches or stoppers. Mega Cover provides excellent chafe and UV protection, but because of its compact 40-plait construction it can also slip. A better choice is a covered Dyneema line such as MegaTwin or TaperTwin, which are made for work in clutches and on winches.

Where can I find more information? See the Gleistein brand page. The running-rigging range is in Gleistein Ropes; mooring lines are in Mooring & Docklines.

The figures on this page come from the official Gleistein Yacht Ropes Catalogue EN, which is available on Gleistein’s website.