Icom IC-M323/IC-M323G Waterproof VHF + DSC

Free ATIS Programming Available
Discontinued Product
  • Check Shipping Cost

Cost effective new generation VHF with DSC. The Icom IC -M323 Includes the new common user interface found on all new Icom Marine VHFs. Soft keys, rotary selector knob and an intuitive menu system provide fast access to radio functions and at the same time reduce prodcution costs resulting in a full featured but economically priced VHF.

New Model IC-M323G with Built-in GPS Receiver
The built-in GPS receiver shows your current position and time and is also used for DSC calls. The GPS data source is selectable from either the built in receiver or from an optional external GPS (GPSOFF menu setting) via the NMEA 0183 input cables. GPS and DSC data can also be transmitted via the NMEA 0183 output cable to other equipment such as plotters and navigation software.

Marine Common User InterfaceNew Common User Interface and Dot Matrix Display
The IC-M323 has an easy to use interface and the new menu system provides easy and intuitive operation. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons. The directional keypad allows you to perform various operations and settings. The large, high definition dot matrix display (38×73mm) allows all information to be clearly viewed.

Built-in Class D DSC (Latest Specification)
The IC-M323 meets the latest Class D regulation (ITU-R M493-13 and EN 300 338-3). The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.

Common NMEA GPS/NAV Interface 
When connected to an external GPS receiver, current position and time are shown on the IC-M323's display. When receiving position information from another vessel, the IC-M323 can transfer it to a navigational device via NMEA 0183 connectivity.

AIS Target Call with the Optional MA-500T
When connected to the Icom’s MA-500TR Class B AIS Transponder, the AIS Target call function allows you to transmit DSC individual calls to a selected vessel instantly without manual MMSI entry saving valuable time in case of an emergency or possible collision.

MarineCommander Compatible
When connected to the MarineCommander, the received DSC message pops up on the multi-function display.

IPX7 Waterproof Protection (1.0m depth for 30 minutes)
The IC-M323 withstands submersion in up to 1.0m depth of water for 30 minutes.

Favourite Channel Function
This function allows for quicker channel selection. Set the “Tag” channel to the channels used most often. When pushing the up/down buttons on the hand microphone, only the tagged channels are selected, while untagged channels are skipped.


  • New, easy to use Icom Marine User Interface
  • Large Full Dot-Matrix Display
  • LCD and keypad backlighting
  • Meets the Latest Class D DSC Specifications
  • NMEA 0183 Input/ Output for Common GPS/NAV interface
  • IPX7 Waterproof Protection (1m depth for 30 minutes)
  • AquaQuake draining function
  • Dual/tri-watch function for monitoring Ch.16 and/or call channel
  • 2W audio output power

Available in Black or Super White

Icom IC-M323 Folleto en Español (IC-M323_Folleto_Español.pdf, 1,111 Kb) [Download]

Icom IC-M323 Brochure English (IC-M323G_Brochure_English.pdf, 435 Kb) [Download]

Icom IC-M323 Manual English (Icom_IC-M323G_Manual_English.pdf, 5,290 Kb) [Download]

No posts found

Write a review

Free Shipping
Free shipping to some destinations

Orders over €300
to the following

United Kingdom

Other destinations
from €11.50