How many features can be squeezed in to one small package? With the Standard Horizon Matrix GX-2100E the answer is a lot.

Fixed VHF with class D DSC, built-in dual channel AIS receiver with on screen display, AIS output for plotter/radar, 30W automatic fog horn and loud hailer, optional fly bridge/cockpit remote for second station operation and control, navigation to waypoints with the built in memory and navigation features and did we mention the commercial grade 80dB receiver.

Dual Channel Class D AIS Receiver Built-in
The GX2100 MATRIX AIS has a dual channel AIS receiver built-in which allows you to see AIS targets simply by pressing the dedicated AIS key. The MATRIX AIS displays AIS MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG and will allow you to contact an AIS Ship directly using DSC, show your vessels position in relation to AIS targets and alert you when an AIS ship may be approaching to close to your location via the Closest Point of Approach (CPA) Alarm. In addition the MATRIX AIS can be connected to any GPS chart plotter that can accept VDM sentence at 38400 baud (a GPS must be connected to use these features).

Navigate to Waypoints
The MATRIX AIS is capable of entering and saving up to 100 waypoints. These waypoints may be selected and navigated to by using a unique navigation compass display that shows your vessels SOG, COG, BRG (Bearing) and DST (Distance) to the waypoint when connected to an external GPS (a GPS must be connected to use these features).

Digital Selective Calling (DSC)
The MATRIX AIS is Class D class DSC VHF with a separate Channel 70 receiver, which allows DSC calls to be received even when listening to traffic on Marine VHF channels. 

The DSC DISTRESS function when activated transmits a digital MAYDAY including vessel identification, Latitude / Longitude and time (with GPS connected), to facilitate prompt response. Additional calls that can be made are Individual, All ship - Urgency and Safety, Group, Position report and position request calls.

DSC Position Polling and NMEA in/output
Easily share position information with other DSC equipped vessels using the position request and position reporting functions. With the push of a few buttons you can request the position of another vessel, or simply send your position information to the vessel you select. 

The GPS Position of a received DSC Distress or Position Request call can be shown on a compatible GPS Chart plotter simply by connecting 2 NMEA wires.

30W PA and Fog signalling with Listen back

The MATRIX AIS includes a 30W Loud Hailer with Fog signals; Bells and Whistles with listenback. For added benefit, the last selected VHF channel can be heard when in the PA or Fog modes.

Optional RAM3 capable
Need to remotely control the VHF from your cockpit of fly bridge? The MATRIX AIS is RAM3 remote mic capable to control all VHF, DSC and AIS functions at a second station.

ClearVoice noise reduction technology speaker microphone
The MATRIX AIS features Clear Voice Noise Reduction Technology eliminating unwanted background noises like engines and wind during transmission. This assures transmissions are crystal clear along with dedicated 16/9 key and channel selection. In addition the microphone includes a speaker for crystal clear reception of transmissions.

Additional Features: 

• Commercial grade 80dB receiver with receiver attenuator
  
• Big, bold display - adjustable brightness and contrast
  
• Programmable Channel Names
  
• Programmable Scan, Priority Scan and Dual Watch
  
• ATIS Mode for use on Inland European Waterways
  
• GPS repeating - on screen position, date, and time
• 3 year warranty