bluemarinestore

Digital Yacht HA156A AIS Optimized Stub / Helical Antenna with 20M Coax Cable

Light weight and very compact stub helical antenna optimized for use at AIS frequencies and supplied with 20 metres of coax cable. Fitted with an L bracket for simple installation at the top of the mast.

AIS systems actually utilise a frequency of around 162 MHz unlike marine VHF radios which operate at 156 MHz. The difference does not sound significant and although a normal VHF antenna will work, the use of an AIS optimized antenna will significantly enhance performance of both receivers and transponders.

Features:

Ultra light weight and compact helical construction
Tuned to give optimum gain and performance at AIS frequencies (160-162Mhz)
Simple installation with integral L bracket
20m of RG58 coax cable
Can be used as emergency backup VHF aerial (requires optional PL259 adaptor)
Bayonet (BNC) fitting for quick fit to all Digital Yacht AIS units
No ground plane required

Blue Sky Energy Solar Boost 1524iX MPPT Regulator

Get the maximum performance from your solar panels with the new Solar Boost 1524iX MPPT charge controller form Blue Sky Energy. Low cost high power solar regulator with up to 30% or more amps.

The Solar Boost 1524iX 12v/24v solar charge regulator for small to medium sized solar installations up to 20 amps. Patented MPPT Maximum Power Point Tracking technology can increase charge current by up to 30% or more compared to conventional solar regulators. The Solar Boost 1524iX provides an advanced fully automatic 3-stage PWM charge control system to ensure batteries are properly and fully charged, resulting in enhanced battery performance with less battery maintenance. The dual 20/15 amp rating will deliver at up to 15 amps in 24 volt systems, or up to 20 amps in 12 volt systems. An automatic or manual equalize function is also provided to periodically condition flooded lead-acid batteries. A charge status LED indicates the present charge mode, and shows when the battery has become fully charged.

Auxiliary Output & Load Controller. The user configurable auxiliary output can serve as either a 20 amp load controller ideally used to limit excessive battery discharge in unattended systems such as providing fully adjustable dusk to dawn lighting control, or as a 2 amp auxiliary battery charger ideal for charging a separate battery such as the engine battery.

Integrated PowerNet™ - IPN Network. The optional IPN-Remote or IPN-ProRemote displays provide complete charge control & battery system monitoring, eliminating the need for a separate battery monitor device. The Integrated Power net allows up to 8 IPN capable charge controllers to communicate with each other and operate as a single machine rather than separate charge controllers. The IPN network also allows networked controllers to share an optional battery temperature sensor and remote display. The IPN network does not require a display or other special communication hardware to operate.

Now with a five year warranty

Solar Boost 1524iX features:

20 amp 12V or 15 amp 24V rating supports a wide range of applications
Suitable for panels with Voltage Voc up to 45.6V
Auxiliary output serves as 20 amp load controller or 2 amp battery charger
Load controller provides fully adjustable dusk to dawn lighting control
IPN network interface coordinates multiple controllers & shares optional battery temperature sensor & display
Optional IPN-Remote display provides complete charge control & battery system monitoring, eliminating the need for a separate battery monitor device
3-Stage charge control with filtered PWM output & auto/manual equalization improves battery performance & life
Durable powder coat finish & conformal coated electronics resist corrosion
Full 5 Year Limited Warranty
Battery temperature sensor input
ETL listed to UL STD. 1741, certified to CAN/CSA STD. E335-1/2E, CE labeled

Blue Sky Energy Battery Temperature Sensor

Battery temperature sensor cable for the Blue Sky Energy MPPT charge regulators. The ideal charge voltage required by batteries changes with battery temperature and temperature changes onboard can be substantial. The battery temperature sensor allows the charge controller to continuously adjust charge voltage based on actual battery temperature. Temperature compensation of charge voltage assures that the battery receives the proper charge voltage as battery temperature changes during normal operation.

Compatible with:

Solar Boost 2000E
Solar Boost 1524iX
Solar Boost 3024iL

Spinlock Deckvest 5D 170N Hammar Lifejacket

Spinlock’s latest high spec auto inflating 170N performance lifejacket harness. Based on the original Spinlock Deckvest, the Deckvest 5D includes the award winning Pylon Light and many other features and accesories as standard. When only the best will do, the Spinlock Deckvest 5D is the obvious choice. CE approved to ISO12402-3, the new International standard for lifejackets and ISO12401 for Deck Safety Harnesses.

Absolute comfort in all conditions for both men and women - the unique ‘Shoulder Fit System’ flexes & locates ensuring a correct fit on the shoulders every time, the new back adjustment is hidden and non snag for easy simple adjustment. Compact cut-away design allows for total mobility. Secure, easily adjusted double-buckle belt and low profile collar shape.

Complete Man Overboard Protection for experienced sailors - 170N Buoyancy with auto Inflation and built-in deck harness with soft, high-tensile fibre connector loop. Crotch and thigh straps included.

Unequalled Safety Equipment and Accesories - new high intensity 23cm Pylon™ Light antenna deploys on inflation for all round visibility. High visibility sprayhood to protect from spray inhalation and emergency safety line cutter and mesh pocket for VHF Radio or PLB emegency beacon.

Hammar Hydrostatic MA1 Activation Head - with visible indicator to check activation status.

5 years Warranty from first registration

Unique ‘Shoulder Fit System’ New back
adjustment
Fitted with sprayhood
23cm Pylon Light
Hammar Hydrostatic activation head
Soft loop safety line attachment
Mesh pocket for VHF/PLB Locator
Double Crotch Straps / Thigh straps with recessed clips
Quick Access Emergency safety line cutter

Available in 3 sizes in Gun Metal Black or Tropic White

Size	Ref. Number	Chest Measurements
Size 1	DW-LJH5D/H1	60cm - 90cm
Size 2	DW-LJH5D/H2	72cm - 125cm
Size 3	DW-LJH5D/H3	100cm -150cm

Manual Only firing head also available, contact us for details.

Please note - some images show the Pro Sensor model.

Blue Sea Systems Weatherdeck Toggle Switch

Manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck™ Panels and also suitable for isolated installation on any panel / surface up to 6mm thick. Suitable for DC systems up to 15 amps and AC systems up to 10 amps. Nickel-plated brass and phenolic non-corrosive construction for long life. Features standard male 6.35mm tabs for quick connect crimp terminals.

Weatherproof boot/cover available for exterior installation up to IP67- (temporary immersion for 30 minutes).

Available in the following types.

4150 - OFF/ON Single Pole- 2 Position Off / On

4151 - OFF/(ON) Single Pole - 2 Position Off /Hold On

4152 - ON/OFF/ON - Single Pole - 3 position switch On / Off / On

4153 - (ON)/OFF/ON - Single Pole - 3 position switch - Hold On / Off / On

4154 - (ON)/OFF/(ON) - Single Pole - 3 position switch - Hold On / Off / Hold On

Blue Sea Systems Weatherdeck Panel Switch Waterproof Boot

Waterproof boot / cover for use with Carling Technologies and Blue Sea Systems Weatherdeck toggle switches. Once installed the switch is waterproof, rated to IP67-temporary immersion for 30 minutes. Ideal for exterior / cockpit use. UV resistant material resists discoloration and cracking.

Monel Rivets - Countersunk Head (Pack of 10)

Pack of 10 monel rivets with countersunk head recommended for use on aluminium masts. Stronger than stainless but softer and therefore easier to use in rivet guns. Monel does not suffer from crevice crack corrosion like stainless.

We recommend Duralac to avoid corrosion between the aluminium and monel.

Monel Rivets - Standard Dome Head (Pack of 10)

Pack of 10 monel rivets with standard dome head recommended for use on aluminium masts. Stronger than stainless but softer and therefore easier to use in rivet guns. Monel does not suffer from crevice crack corrosion like stainless.

We recommend Duralac to avoid corrosion between aluminium and monel.

Glomex RA206 Nylon Masthead Insulating Pad

Reinforced nylon insulating pad for use on aluminium masts with a curved back and flexible enough to adapt to most mast profiles. Designed to be riveted to an aluminium mast, the Glomex RA206 has four stainless steel encapsulated bolts for easy attachment to the Glomex RA106BRACKINOX-L standard masthead bracket and the RA106BRACKINOX stand-off bracket, avoiding galvanic corrosion between the aluminium and stainless steel.

Recommended for use with all the Glomex sailboat antenna models (RA106, RA109, RA2022, RA128/18-25 series).

Glomex RA165 Stainless Steel Ratchet Rail Mount

Very high quality electro polished stainless steel ratchet rail mount with locking handle for adjustment to any angle. Standard 1" x 14 mount with cable hole for GPS, antennas upto 2.4m and other accesories. Suitable for vertical or horizontal rails of 7/8” (22mm) and 1” (25mm).

Glomex V9114 Vega Compact TV + AM/FM Radio Antenna

Ultra compact omnidirectional TV & AM/FM Radio antenna suitable for both analog and digital terrestrial system broadcasts. Only 210mm high and 100mm diameter the conical shape avoids snagging with lines and sails. The included V9114PI-FM power inserter (amplifier) and signal splitter for installation below decks provides up to 27,5 dB of signal boost and allows connection of both tv and radio cables simultaneously.

Includes:

Universal screw down mount
10m of 75ohm coaxial tv cable
1.5 m cable for connecting the splitter to the TV

Specifications:

Diameter - 100mm
Height - 210 mm
Mount - Standard 1" x 14 Female
Weigh - 250grams
Reception - 360°
Frequency - 40/890 MHz
Power - 12 Vdc / Consumption - 20 mA

Glomex RA106 / RA109 Stainless Steel Adaptor

Polished stainless steel female to female adaptor, allows Glomex RA106 and RA109 whip antennas to be mounted with a standard 1" x 14 base/mount. Also suitable for Metz Manta antennas.

Features a female 1" x 14 thread on one end and a female thread on the opposite end for the antenna base.

Digital Yacht NMEA - USB Adaptor

Easily connect a laptop or on-board computer to NMEA 0183 devices with the bi-directional Digital Yacht USB to NMEA Serial Adaptor cable. Compatible with PC, MAC and Linux computers.

Simple and cost effective, the Digital Yacht ZDIGUSBNMEA contains a small internal electronic circuit board which provides full bi-directional conversion of NMEA 0183 data. Includes Tx and Rx LEDs which give a visual indication of data traffic on the cable. Easily programmed for 4800 baud rate or higher speed 38400 baud rate used by AIS systems. The Digital Yacht NMEA adaptor creates a virtual COM port on the computer which navigation and charting software can use to read NMEA data. Multiple adaptors can be connected if necessary which effectively allow a number of NMEA ports to be created on your computer.

Includes driver CD for use with PCs, MACs and even Linux based systems and a free CD copy of SmarterTrack Lite AIS viewing software - effectively turning your PC into an AIS target display.

Features:

USB powered and USB 2.0 full speed compatible
Tinned wire ended connections which can be quickly connected to the NMEA 0183
Programmable for 4800 and 38400 baud rates - Max transfer rates up to 1 Mbaud
Drivers available for WinXP, Vista, Win7, LINUX and Mac OS X
Includes free copy of SmarterTrack Lite AIS viewing software
1.8m long FCC, CE and RoHS compliant.

Digital Yacht HSC100 NMEA Compass Sensor

High speed digital NMEA 0183 heading sensor for radars, plotters, PC navigation systems and instruments.

The Digital Yacht HSC100 uses fluxgate technology to deliver high speed 10Hz (ten times per second) heading data required for many on board systems. Unlike other low cost heading sensors which only output data at 1Hz (once per second) the high speed HSC100 is suitable for use with MARPA/ARPA radar and overlay as well as plotter, and PC based navigation systems which then allow chart displays to be referenced to the boat's heading.

The HSC100 has a simple two wire NMEA output and runs on either 12V or 24V with minimal power consumption. It is waterproof and can be mounted inside or outside (suitable for steel hulled vessels ). Features an automatic calibration/deviation routine to compensate for the effects of any nearby magnetic influences. A heading offset can also be applied if the sensor is mounted at an angle to the boat's centreline.

Features:

Suitable for both 12v and 24v systems
8-30v DC Typical 25mA Reverse polarity protected
High speed (10Hz) NMEA electronic fluxgate compass sensor
Ideal for use with radar overlay and MARPA target tracking systems
Industry standard NMEA 0183 HDG output 4800 BAUD
Additional AD10 heading output for interface with Furuno systems
2 axis tilt compensated floating core fluxgate. Gimballed to 45 degrees
Waterproof to IPx7 and suitable for external mounting
Automatic calibration routine and manual compass offset feature
3 LED shows compass status
68 x 30mm 0.12kg excluding cable - Supplied with 15m cable

Glomex V9177 Stainless Steel Universal Mount

Electro polished stainless steel universal mount for antennas, GPS and other equipment. Features a standard 1"x 14 male thread typically required for GPS, VHF, Navtex, TV, AM and FM antennas. Designed for surface mounting with three screws/bolts. Hollow interior for cable installation.

Female / female adaptor available for use with sailboat whip antennas.

Digital Yacht iAis WiFi AIS Receiver

Convert your iPhone, iPad and iTouch devices into a complete navigation system.

High performance dual channel AIS receiver combined with an integrated 802.11b+g wireless access point to wirelessly transmit AIS information over a local Wifi hotspot. Designed specifically for use with iPhone, iPad and iTouch devices as well as many other devices with the triple TCP/IP, NMEA and USB outputs. built in multiplexor adds other data available on board into the single wireless feed, even an iTouch or iPad that does not have an internal GPS can now be used for navigation and the iPhone recieves the improved performance of the boats own GPS system.

Free iAIS App - Download the free iAIS app from the App store for a simple AIS display.

Compatible with iNavX - Compatible with Navionic’s charts, iNavX provides a complete set of navigation functions that turns your Apple device into a full function electronic chart plotter. It supports waypoints, routes and tidal data and is beautifully simple to use. It even overlays GRIB weather data.

Triple Output - As well as sending data wirelessly, the iAIS also has an NMEA0183 and USB interface so that you can output data to a PC (via USB) and a dedicated plotter (via NMEA) for larger installations.

Built in Multiplexor - Combines NMEA data that is available on board such as GPS, depth, speed and wind etc. with AIS data into a single wireless feed or via NMEA or USB output.

Features:

World’s first wireless AIS and NMEA Data server
Triple output - WiFi, NMEA 0183 and USB
Multiplexed NMEA input for wireless NMEA data feed of boat’s instrument and GPS data
Free iAIS App for iPhone, iTouch or iPad
Integrated 802.11b+g wireless access point
Fully compatible with popular iNavX navigation application for Apple mobile devices
Rugged IPX5 aluminium housing
Requires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter
Simple “fit and forget” black box solution

Digital Yacht AIT2000 Class B AIS Transponder

The third generation AIS transponder form Digital Yacht. The AIT2000 uses the latest AIS transponder technology, increases performance and interfacing options and builds on the success of its predecessor, the very popular Digital Yacht AIT1000, but in a package only half its size, one of the world’s smallest class B devices. As well as transmitting your own vessel’s position so that other AIS equipped vessels know where you are, the AIT2000 will receive all AIS targets within range of your boat – typically up to 30NM.

Multiple Input / Output Options - The ultra-compact AIT2000 Class B Transponder has three output options built-in. NMEA 0183, NMEA 2000 and USB connection, allowing it to work with every AIS compatible chart plotter or software package on the market today.

Dual NMEA 0183 Inputs and Outputs - The AIT2000 can receive both 4800 and 38400 baud rate inputs. This data is then multiplexed with the AIS data and output via the NMEA output 1 at 38,400 or the USB cable. NMEA output 2 transmits GPS data at 4800 baud perfect for a DSC VHF or instrument system.

Remote Silence Switch Option - By adding a simple remote toggle switch (not included) the transmit function of the AIT 2000 can be turned off when not required. A waterproof switch can be installed in the cockpit.

Built-in 50 channel GPS receiver - Output GPS date via NMEA 2000, USB or NMEA0183, the supplied GPS antenna is designed to be fitted to a standard 1” x 14 TPI threaded pole mount

Windows and Mac proAIS2 Software Included - Configuration of your vessel’s fixed data, such as MMSI, call sign, boat name, dimensions etc. is made easy with the included Windows and Mac compatible proAIS2 software. Once configured, the unit will provide AIS data to a PC or Mac running suitable navigation software or a dedicated chart plotter, such as the latest Garmin, Raymarine, Navico, Standard Horizon and Furuno units.

Features:

Suitable for both 12v and 24v systems
Latest generation AIS technology – brand new AIS transponder (Class B) design
Ideal for use with existing plotter and radar systems
Built-in high performance 50 channel GPS receiver (ideal also as a backup GPS)
USB Interface for simple plug and play connection to a PC or Mac
Includes N2Net interface and cable for connection to NMEA 2000 network
High speed NMEA (38,400 baud) – compatible with industry standard plotters
Comes complete with GPS antenna with integral 1”x14TPI thread mount
Requires dedicated VHF/AIS antenna or splitter (SPL250)
Remote Silence Switch option
Easy to install black box solution

Digital Yacht AA10 AIS Optimized Whip Antenna

Light weight and compact (only 46cm long) whip antenna optimized for use at AIS frequencies. AIS systems actually utilise a frequency of around 162 MHz unlike marine VHF radios which operate at 156 MHz. The difference does not sound significant and although a normal VHF antenna will work, the use of an AIS optimized antenna will significantly enhance performance of both receivers and transponders.

Supplied with a 10 metre cable (a 10m extension is also available) and a solder-less BNC connector for direct connection to all Digital Yacht AIS receivers and transponders and many other models as well. Standard 1" x 14 TPI female threaded base for fixing to standard VHF mounts.

Features:

Ultra light weight helical construction
Tuned to give optimum gain and performance at AIS frequencies (160-162Mhz)
Integral 1" x 14 TPI thread for fixing to standard VHF mounts
Robust design for mounting at deck level
10m of RG58 coax cable
Can be used as emergency backup VHF aerial (requires optional PL259 adaptor)
Bayonet (BNC) fitting for quick fit to all Digital Yacht AIS units
No ground plane required
Unity gain
VSWR <1.5:1 at resonance

Please Note - The screw down base shown in the image is not included.

Reinforced PVC Hose

All-purpose PVC suction and delivery hose suitable for a temperature range of -15°C / + 65°C. Reinforced with a rigid PVC spiral, smooth inner and outer surface and good flexibility at low temperatures. Suitable for bilge pumps, shower pumps, grey water pumps as well as deck and sink drains and deck wash pumps.

Available in sizes from 1/2" (13 mm) to 3" (76 mm) interior diameter.

Internal Diamter Inches / mm	Weight grams/metre	Burst Pressure Bar	Bend Radius mm	Wall Thickness mm	Hose Clip mm
1/2" (13mm)	150	32	64	2.5	14-22
5/8" (16mm)	180	27	76	2.6	17-25
3/4" (19mm)	230	24	102	2.9	22-30
1" (25mm)	310	22	127	3.1	25-35

Flojet Heavy Duty Deck Wash Pump

Automatic, high velocity, self-priming multi diaphragm deck and anchor washdown pump provides shore pressure onboard. Built in pressure switch turns the pump on and off automatically when the included hose nozzle is opened or closed. Designed for either fresh or salt water use, the heavy duty water resistant, coated motor and sealed pressure switch deliver upto 40 PSI. With the additon of a 3 - 20 litre accumulator tank the pump can also be used as a water pressure pump for up to 6 or more fixtures or a contnous duty live well pump.

Features Flojet 19mm barbed snap-in ports and includes an inlet strainer, 2 x hose fittings and a pistol grip nozzle.

Flojet Heavy Duty Deck Wash Pump 17 LPM

Available in 12v and 24 volt versions Suitable for fresh or salt water
Heavy duty - Shut-off pressure 2.8 bar (40psi)
Connections - Flojet quick connect fittings for 19mm hose
Output - 17 litres/minute
Multi-diaphragm design self primes to 2m vertical lift, can run dry without damage
Recommended fuse - 15 amp
Safety - fetaures automatic thermal overload cut-out
Dimensions - Length 25.2cm Width 16cm Height 10cm
Weight: 3.09 Kg